Features
Compliant with DisplayPort Alternate Mode on USB Type C standard
Compliant with DisplayPort Specification version 1.4 and Embedded DisplayPort (eDP) Specification version 1.4
Support up to 4 Main Link Lanes at 1.62Gbps,2.7Gbps (HBR), 5.4Gbps (HBR2), or 8.1Gbps (HBR3) link rate
Automotive DP input signal detection and Lane swap supported for compliance with the USB type C cable plug orientation switch
AUX CH polarity inversion supported for USB type C cable plug orientation switch
Adaptive DisplayPort receiver equalization supported for the compensation of input signal attenuation
Support Fast and full Link Training
Support eDP Authentication: Alternative Scramble Seed Reset and Alternative Framing
HDMI transmitter compliant with HDMI specification version 2.0 and DVI specification version 1.0
HDMI transmitter supports up to 6.0Gbps data rate for video timing of 4Kx2K@60Hz
SCDC supported on HDMI DDC
CEC tunneling over AUX is supported
High-Dynamic-Range (HDR) Static Metadata: HDR10 (SMPTE ST2084), Hybrid Log-Gamma (HLG), Dolby Vision (SMPTE ST2084) are supported
RGB/YCC444/422 to YCC444/422/420 conversions are supported, deep color depth up to 16 bit
Progressive 3D video formats supported
HDCP engine compliant with HDCP 2.2 and HDCP 1.4 specification with internal HDCP Keys
HDCP 1.4/2.2 repeater supported
2 USB Type-C ports integrated compliant with USB Type-C Cable and Connector Specification revision 2.0
Compliant with USB Power Delivery Specification Revision 3.0, with USB Power Delivery BMC transceiver integrated on USB Type-C ports
Charge Through function support
Fast Role Swap support
SPDIF/IIS input supported with audio sampling rate up to 192KHz
On-chip Audio Decoder which support 8 channel Audio input from DP Rx and output from HDMI Tx, support LPCM(16/20/24 bit) format with sampling rate up to 192kHz, compressed audio formats (AC3, DTS, DTSHD MA, and Dolby MAT) and HBR audio formats with frame rate up to 1536kHz
Integrated Ra, Rd and Rp for USB Type-C
Embedded MCU to handle the control logic
Full speed USB billboard module supported with USB 2.0 PHY integrated
Embedded ROM, integrated EDID Buffer
IIC Slave, USB 2.0 are available for firmware update
IIC slave interface are available for debug
Low power architecture, support Auto Power Saving mode and low stand-by current
Low power architecture
RoHS compliant and Halogen free package
Offered in 68 pin QFN package