If you have questions about the product, or encounter any, you can register the site account,
Then go to the technical support forum to ask for help.


  •  2 Lane DisplayPort Receiver and Transmitter compliant with DisplayPort specification version 1.2 and Embedded DisplayPort (eDP) Specification version 1.3. Optional HDCP version 1.4, Support VESA and CEA timing standards up to 1920x1200 in 8-bit input with 60Hz refresh rate
  •  HDMI Receiver and Transmitter compliant with HDMI 1.4 specification and DVI 1.0 specification.
  •  Support HDMI repeater function.
  •  Single / Dual channel LVDS 18 / 24 bits receiver and Transmitter supports up to 165 Mpixels/s
  •  Support 16/18/24 bit parallel video input. Support SDR, DDR, 2X and 3X input timing mode.
  •  Support BT656 and BT1120 input and output, with embedded or separate sync mode
  •  Support DP/HDMI 3D input, and output DP/HDMI with repacked 3D content, or output LVDS with R/L View separately. Support LCD panel with resolution up to 1920x1200@60Hz in 2D mode or 1366x768@120Hz in 3D mode
  •  Three on-chip 9-bit high speed DACs providing flexible output capabilities. Such as single, double or triple CVBS outputs, YPbPr output, RGB output and simultaneous CVBS and S-video outputs
  •  VGA output is compliant with VESA VSIS v1r2 specification
  •  Support Component YPbPr output and analog RGB (VGA) monitor up to 1900x 1200 or 1080P
  •  Advanced pin-multiplexed technology to support multiple input/output display standards
  •  Support two independent display timing data received simultaneously from two separated input paths
  •  OSD controller support
  •  TV / Monitor connection detection capability.
  •  Support LCD panel protection and power sequencing. PWM is available for controlling LCD backlight brightness. Dynamic backlight dimming to save power consumption Powerful image enhancement engine embedded
  •  SPDIF audio interface supports either 16-bit or 20-bit stereo data with sampling rate up to 192kHz/2ch.
  •  Support 2 channel I2S digital audio input and 8(7.1) channel output for up to 24-bit data stream (32kHz/8ch, 44.1kHz/8ch, 48kHz/8ch,88.2kHz/8ch, 96kHz/8ch, 176.4kHz/8ch and
  • 192kHz/8ch)
  •  Supports LPCM, One Bit Audio, Dolby Digital,DTS, DSD,HBR digital audio formats
  •  27MHz is available as crystal or oscillator clock input frequency
      MCU embedded to handle the control logic
      Integrated EDID Buffer
      IO and SPC/SPD supply voltages from 1.8V to 3.3V
      Programmable power management
      Device fully programmable through serial port or can automatically load firmware from EEPROM
      RoHS compliant and Halogen free package
      Offered in 196 pin BGA package


Chrontel CH7039 is an innovative display interface product designed for embedded systems, consumer electronics and computing in which conversions among multiple high definition video/audio formats are required. Built in with multiple differential receivers and transmitters, and easy-to-use audio interfaces, the CH7039 can drive LCD panels through either a single or dual channel LVDS/TTL interface or a 1/2 lane DisplayPort interface. It can also simultaneously output to external displays using standards such as HDMI/DVI, YPbPr, VGA, CVBS or S-Video. This device will help manufactures reduce design costs, accelerate time-to-market and expand product features for better user’s experience.

The CH7039 has four input and four output ports to supports multiple display standards. Some ports are multiplexed with different signal types to reduce pin count. For example, the 24-bit wide digital port can be programmed to receive LVDS or TTL signals and supports various formats like RGB, BT1120, BT656, etc. while the 8-bit port can accept HDMI or BT656 inputs. The 2 Lane DP / eDP port stands alone because of its high data transfer rate.

Through a 4x2 input switch matrix, the device can be configured to simultaneously accept two separated video formats with independent display timing. The input combination can be mixed among the TTL/BT1120/LVDS, the DP/eDP and the HDMI/BT656 input in either RGB format (RGB-565, RGB-666 or RGB-888 and etc.) or YCrCb format (ITU-R601/656 and BT1120). A 2x4 output switch matrix can be programmed to drive the various output ports simultaneously with two kinds of independent timing.

The CH7039 supports 3D data structures defined by DP and HDMI standards. The device can translate and repack 3D data when DP signals are converted to HDMI and vice versa. 3D data can also be displayed as R/L frame via its LVDS output.

The CH7039’s DisplayPort receiver and transmitter are designed to comply with DisplayPort Specification 1.2 and Embedded DisplayPort (eDP) Specification version 1.3. It provides support for one or two Main Link lanes with data rate running at 1.62Gb/s or 2.7Gb/s. To further optimize the display quality and power dissipation, this device is equipped with seamless display refresh rate switching and progressive to interlace timing switching capabilities.

The CH7039’s HDMI receiver and transmitter are designed to meet HDMI Specification 1.4 and DVI Specification 1.0. On-chip HDCP cipher engine can be activated to protect the high definition media content.

Dual channel LVDS receiver and transmitter are incorporated into the CH7039. The Panel protection mechanism is also built in to switch off the LCD instantly through device’s automated panel on/off sequences if input data is missing or unstable. The backlight on/off control can be configured through programming internal registers. A built-in PWM generator can be used to adjust display brightness and dimming of the LCD. Dithering algorithm is implemented on chip in support of 18-bits LCD panels.

To support legacy analog displays, three high-performance 9-bit DACs along with separate horizontal and vertical sync outputs are used. CH7039 can output analog RGB signals for VGA monitor, YPrPb for HDTV and CVBS / S-Video for SDTV.

To support local digital audio input and output, the device has both SPDIF and 2-channel I²S digital audio interfaces. Like the video signal path, the audio path can take inputs from DP, HDMI, SPDIF and I2S sources and repack the data for the chosen outputs. Its high fidelity audio engine can handle sampling frequency for up to 192kS/s of stereo and 7.1 audio. The SPDIF interface supports PCM encoded data and compressed audio including Dolby Digital and DTS.

In summary, the CH7039 is a general purpose display interface converter. It is designed to handle both advanced and legacy display interface standards. It can be used in universal docking stations for phones, tablets, personal computers, OTT and IOT devices for both the office and the home markets.




PCB Layout and Design Guide for CH7038/9 Multi-Standard Display Interface Converter with Scaler AN-B041-CH7038and9 Rev.0.8






Part Number Package Type  Operating Temperature RangeMinimum Order Quantity

CH7039A-TF176 ETQFP, Lead FreeCommercial : 0°C to 70°C60/Tray

CH7039A-GF196 BGA, Lead FreeCommercial : 0 to 70°C184/Tray

| Sales Inquiry :  |  Product Information: |




Founded in 1986, Chrontel develops and markets mixed-signal integrated circuits. The company is a leading provider of display interface IC's for personal computers, portable media players & smartphones. Interfacing to different computing platform standards including TV, HDTV, LCD, ...




Address:2210 O’Toole Ave. Suite 100, San Jose, CA 95131-1326

TEL: (408) 383-9328

FAX: (408) 383-9338

Copyright © 1998-2017 Chrontel, Inc. All Rights Reserved.          Privacy protection Legal statement